Oil Cooled Power Transformers with a standard range of 5000 KVA to 25 MVA. 33, 66, 132 KV voltages class.
Design conforms to IS 2026, IEC 60076, ANSI and other relevant standards
Designed to withstand electrical impulses and thermal and dynamic stresses
Optimum utilization of active materials for compactness

approved offload distribution transformer starting from 10 KVA to 2500 KVA under IS-1180 and above 2500 KVA up-to 4000 KVA under IS-2026 of all voltage class and covering all level of efficiency.
Indoor/ Outdoor tank Mounted
Copper with multiple paper covering
BIS-1180, IS-2026, IEC 60076 applicable standards

Oil Cooled Distribution Transformers built with standard range of
250 KVA to 15 MVA.
Designed to give maintenance free long lasting operation for minimum 30 years.
Copper Static shield provided between primary and secondary to protect transformer against disturbance.
We take flux density lower to decrease core loss due to harmonic interference from inverters and thyristors.

Furnace Transformer is designed for induction melting and induction heating for ferrous and non-ferrous metal.
Induction Furnace has coil constructed from heavy copper tubing.
Copper with multiple paper covering
IS-2026, IEC 60076 applicable standards

In view of the requirement of Indian Industry, we have introduced Cast Resin (Dry Type) Transformers.
This introduction supplements our existing product viz. Vacuum Resin Impregnated Dry Type Transformers. Dry Type Transformers of both the above varieties are in use.
The Company has Resin Impregnated Dry type Transformers up to 2 MVA, 11 KV Class and Cast Resin Dry type Transformers up to 2 MVA, 11 KV Class.

Compact Substation with a standard range is 250 KVA to 5000 KVA. 3.3, 6.6, 11, 22 & 33 KV voltages class.
Dry type or vacuum impregnated transformer.
Designed for indoor installation close to their point of use at the center of the major load consumers.
These transformers are combined with their primary and secondary switchgear and distribution boards into compact substations that are installed directly at their point of use.